Section 3 - Configuration
Local Connectivity Only allows you to set up an IPv6 connection that will not connect to the Internet. For this Internet Connection type, you
must click on Advanced Settings... to see the required fields below.
Enable ULA:
Click to enable Unique Local IPv6 Unicast Addresses settings.
Use Default
When ULA is enabled, you may also enable automatic configuration
ULA Prefix:
of the ULA prefix.
Current ULA
Will display the Current ULA Prefix.
Prefix:
LAN IPv6 ULA:
Will display the LAN IPv6 ULA.
Click Save when you are done.
D-Link DIR-850L User Manual
Local Connectivity Only
50