Port Forwarding - D-Link Wireless AC1200 User Manual

Section 3 - Configuration
Port forwarding allows you to specify a single port or a range of ports to open for specific devices on the network. It
allows traffic requests from a specific application to be directed to a specific client.
From the Advanced menu, click Port Forwarding.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
.
new rule, click Add Rule Click Save when you are done.
When you click on Add Rule, the Create New Rule window will open. Enter the required
information into the fields described below:
Name: Enter a Name for the new rule.
Local IP:
Enter the IP address of the computer on your local network that
you want to allow the incoming service to. Or, select the Computer
Name from the drop-down menu.
TCP Port: Enter a TCP Port (or a range of TCP ports) you want to open. Separate
ports with a comma (for example: 24,1009,3000-4000).
UDP Port: Enter a UDP Port (or a range of UDP ports) you want to open.
Separate ports with a comma (for example: 24,1009,3000-4000).
Schedule: Use the drop-down menu to select a Schedule when the rule will
be enabled. The schedule may be set to Always Enable, or you can
create a schedules from the Schedules section (refer to page 71).
Click Apply when you are done.
D-Link DIR-850L User Manual

Port Forwarding

63