Confirmation Report - Panasonic KX-FP250 Operating Instructions Manual

Sending Faxes

Confirmation report

The sending report will provide you with a printed record of the fax transmission result.
One of the following choices is available.
ERROR: The sending report will print out only when fax transmission fails (pre-selected setting).
ON: The sending report will always print out, indicating whether fax transmission is successful or not.
OFF: The sending report will not print.
1
Press MENU .
Display:
2
Press , then
0 4
3 Press
START/COPY/SET
4
Press or to select the desired setting.
5 Press
START/COPY/SET
6
Press MENU .
Sample of a sending report
SENDING REPORT
NO. OTHER FACSIMILE
01 2345678
Note:
If your fax is not transmitted to the other party's fax machine using the FaxSav network, the FaxSav network
will send a Non-Delivery Notice to your unit.
48
1.SYSTEM SET UP
.
SENDING REPORT
.
MODE=ERROR
.
SETUP ITEM [
START TIME USAGE TIME MODE
Jan. 20 01:18PM 00'51
SND: Sent directly.
IQ-FAX: Sent to the fax
server.
Dial keypad
START/COPY/SET
]
Jan. 20 1998 01:19PM
PAGES RESULT
SND COMMUNICATION ERROR (43)
00
Communication
message
(See page 78.)
MENU
/
CODE
Error code
(for service
personnel
use only)