Cleaning
Document feeder
If misfeeding occurs frequently or if dirty patterns or black bands appear on a copied or transmitted document,
clean the document feeder.
1
Disconnect the power cord and the telephone
line cord.
2
Slide the cover open lever forward.
3
The cover is under tension to improve print quality.
Pull up hard enough to open.
4
Clean the document feeder rollers, sub roller and
rubber flap with a cloth moistened with isopropyl
rubbing alcohol, and let all parts dry thoroughly.
5
Clean the white plate and glass with a soft dry
cloth.
6
Close the cover securely by pushing down on both
corners.
7
Connect the power cord and the telephone line
cord.
Caution:
Do not use paper products, such as paper towels
or tissues, to clean the inside of the unit.
Thermal head and black bar
If dirty patterns or black or white bands appear on a copied or received document, clean the thermal head and
black bar.
1
Disconnect the power cord and the telephone
line cord.
2
Slide the cover open lever forward.
3
The cover is under tension to improve print quality.
Pull up hard enough to open.
4
Clean the thermal head and black bar with a cloth
moistened with isopropyl rubbing alcohol, and let it
dry thoroughly.
5
Close the cover securely by pushing down on both
corners.
6
Connect the power cord and the telephone line
cord.
Caution:
To prevent a malfunction due to static electricity,
do not use a dry cloth and do not touch the
thermal head directly with your fingers.
90
For Assistance, Call 1-800-435-7329
Cover open
lever
Glass
White plate
Thermal head
Black bar
Telephone
line cord
Power cord
Rubber flap
Sub roller
Document feeder rollers
Caution:
Do not push on
the black cover.