Error Messages; Printed Reports; Error Messages Printed Reports - Panasonic KX-FP250 Operating Instructions Manual

Error Messages

Printed reports

When your fax does not transmit, check the following items first.
– The number you dialed is correct, and
– The other party's machine is a facsimile.
If the problem remains, correct the problem by following the communication message printed on the sending
and journal reports (see pages 48 and 49).
Communication message
COMMUNICATION ERROR
DOCUMENT JAMMED
ERROR-NOT YOUR UNIT
MEMORY FULL
NO DOCUMENT
OTHER FAX NOT RESPOND
PRESSED THE STOP KEY
THE COVER WAS OPENED
OK
78
Error code
A transmission or reception error occurred. Try again or check
41–72
with the other party.
FF
— The document is jammed. Remove the jammed document (p. 87).
54, 59
A transmission or reception error occurred because of a problem
70
with the other party's fax machine. Check with the other party.
The document was not received due to memory being full.
—
The document was not fed into the unit properly. Reinsert the
—
document and try again.
—
The other party's fax machine was busy or ran out of recording
paper. Try again.
The document was not fed properly. Reinsert the document and
try again.
The other party's fax machine rings too many times. To send a fax
manually, dial the number, confirm the fax tone, and press
START/COPY/SET
The other party's machine is not a facsimile. Check with the other
party.
The number you dialed is not in service.
The
STOP
—
canceled.
The cover was opened. Close it and try again.
—
—
Fax communication was successful.
For Assistance, Call 1-800-435-7329
Cause & Remedy
.
button was pressed and fax communication was