Application Management; Ftp Server - D-Link ShareCenter DNS-340L User Manual

Section 4 - Configuration
The Application Management section allows you to configure many services for your DNS-340L. The server and service settings
include: FTP server, Add-ons, AFP, NFS, and multimedia services. Let's begin by looking at configuration options for the FTP
server.
Max User: Set the maximum amount of users that can connect to the

FTP server.

Idle Time: Set the amount of time a user can remain idle before being
disconnected.
Port: Set the FTP port. The default port is 21. If you are behind a
router, you will need to forward the FTP port from the router
to the device. Additional filtering and firewall settings may
need to be modified on your router to allow FTP Access
to the device from the Internet. Once the port has been
forwarded on the router, users from the Internet will access
the FTP server through the WAN IP address of the router.
Passive Mode: In situations where the device is behind a firewall and
unable to accept incoming TCP connections, passive mode
must be used.
Most standard FTP clients like Windows FTP, only support
Client
Western European code page when transferring files.
Language
:
Support has been added for non standard FTP clients that
are capable of supporting these character sets.
D-Link ShareCenter DNS-340L User Manual

Application Management

FTP server
165