Raid 10 - D-Link ShareCenter DNS-340L User Manual

Section 3 - Installation

RAID 10

Under RAID Configuration, Select RAID Type, choose RAID 10. Read the
RAID 5 configuration requirements.
Click Next to continue.
With RAID 10, the drives are mirrored for redundancy and use disk striping
to help optimize reading from storage. Map Drive to Network indicates that
the NAS has separated the drive into a RAID array. Use the drop-down menus
to select drive letters to map the drives to. For further information, refer to
"Mapping a Drive" on page 54.
Note: If the size of these two drives are different, the excess space on the
larger drives will be formatted as a JBOD Volume.
Click Next to continue.
D-Link ShareCenter DNS-340L User Manual 45