Application.management.-.Ftp.server - D-Link ShareCenter DNS-315 User Manual

The ShareCenter is equipped with a built in FTP Server. The server is easy to configure and allows users access to important
data whether they are on the local network or at a remote location. The FTP server can be configured to allow user access to
specific directories, and will allow up to 10 users to access the ShareCenter simultaneously.
Max. User Set the maximum amount of users that can connect to the FTP server.
Idle Time Set the amount of time a user can remain idle before being disconnected.
Port Set the FTP port. Default is 21.
Passive In situations where the device is behind a firewall and unable to accept incoming TCP connections, passive mode must be
Mode used.
Client
Most standard FTP clients like Windows FTP, only support Western European code page when transferring files. Support has
Language
been added for non standard FTP clients that are capable of supporting these character sets.
Flow Allow you to limit the amount of bandwidth available for each user.
Control
SSL/TLS Here the user can enable the SSL/TLS connection only.
FXP Enable or Disable File eXhange Protocol to transfer files from one FTP server to another.
Please Note: In order to use FXP (File Exchange Protocol) for server-to-server data transfer, make sure to change the port
from 21 to some other port as listed in the Port section of the Web UI. Also, make sure to open the corresponding port on
your router and forward that port from your router to the ShareCenter Shadow.
D-Link ShareCenter DNS-315 User Manual
Application Management - FTP Server
140