Ftp Server; Application Management - D-Link ShareCenter Shadow DNS-325 User Manual

Section 4 - Configuration
The ShareCenter is equipped with a built in FTP Server. The server is easy to configure and allows users access to important data whether they are on the local network or at
a remote location. The FTP server can be configured to allow user access to specific directories, and will allow up to 10 users to access the ShareCenter simultaneously.
Max. User Set the maximum amount of users that can connect to the FTP
server.
Idle Time Set the amount of time a user can remain idle before being
disconnected.
Port Set the FTP port. Default is 21.
Passive In situations where the device is behind a firewall and unable
Mode to accept incoming TCP connections, passive mode must be
used.
Client Most standard FTP clients like Windows FTP, only support
Language Western European code page when transferring files. Support
has been added for non standard FTP clients that are capable
of supporting these character sets.
Flow Control Allow you to limit the amount of bandwidth available for each
user.
SSL/TLS Here the user can enable the SSL/TLS connection only.
FXP Enable or Disable File eXhange Protocol to transfer files from
one FTP server to another.
Please Note: In order to use FXP (File Exchange Protocol) for
server-to-server data transfer, make sure to change the port
from 21 to some other port as listed in the Port section of
the Web UI. Also, make sure to open the corresponding port
on your router and forward that port from your router to the
ShareCenter.
D-Link ShareCenter Shadow DNS-325 User Manual

Application Management

FTP Server

63