If A Power Failure Occurs - Panasonic KX-FP141AL Operating Instructions Manual

9. Help
9.3.6 Using an answering
machine (KX-FP141 only)
I cannot receive documents automatically.
L Your greeting message on the answering
machine is too long. Shorten the message.
Record a message up to 10 seconds long.
L The answering machine rings too many
times. Set to 1 or 2 rings.
I cannot receive voice messages.
L Check if the answering machine is turned ON
and connected to the fax machine properly.
L Set the number of rings on the answering
machine to 1 or 2.
I pressed the remote access code to access
the answering machine remotely, but the line
was disconnected.
L The code may include "#" which is used for
certain features provided by telephone
companies. Change the code on the
answering machine to another number which
does not include "#".
Callers complain that they cannot send a
document.
L Your answering machine has run out of
recording tape. Rewind the tape to record
messages.
L You set the answering machine to only give a
greeting message.
9.3.7 Answering device (KX-
FP145 only)
I cannot retrieve recorded messages from a
remote location.
L Press the remote operation ID correctly and
firmly (page 40).
Messages in the mailbox do not play back.
L The mailbox password is wrong. Enter the
correct password.
– For mailbox 1 password, see feature #51
(page 49).
– For mailbox 2 password, see feature #52
(page 50).
The other party complains that they cannot
leave a voice message.
L The memory is full. Erase unnecessary
messages (page 39, 43).
60

9.3.8 If a power failure occurs

L The unit will not function.
L The unit is not designed for making
emergency telephone calls when the power
fails. Alternative arrangements should be
made for access to emergency services.
L Fax transmission and reception will be
interrupted.
L If delayed transmission (feature #25, page
48) is programmed and the start time is
passed during a power failure, transmission
will be attempted soon after power is
restored.
L If any fax documents are stored in the
memory, they will be lost. When power is
restored, a power down report will be printed
out stating which contents in the memory
have been erased.
Note for Australian users:
L Panasonic Australia operates a toll free
Customer Care Centre. Please call
132600 for assistance.
or visit the website www.panasonic
<http://www.panasonic.com.au>
Note for New Zealand users:
L Panasonic New Zealand operates a toll
free Customer Support Centre. Please
call 0800-Panasonic (0800-726276) for
assistance.