Direct Commands For Programming Features - Panasonic KX-FP141AL Operating Instructions Manual

8. Programmable Features
8.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 47 to
page 51.
1
Press {MENU}.
2
Press {#} and the 2-digit code number.
3
Press the desired direct command, using the
dial keypad, to display the desired setting.
L This step may be slightly different
depending on the feature.
4
Press {SET}.
5
To exit programming, press {MENU}.
8.4.1 Program code and direct
command button
{#}{0}{1} Date and time
L Enter the date and time using the dial keypad
(see page 18 for details).
{#}{0}{2} Your logo
L Enter your logo using the dial keypad (see
page 19 for details).
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad
(see page 20 for details).
{#}{0}{4} Sending report
– {1}: "ON"
– {2}: "OFF"
– {3}: "ERROR" (default)
{#}{0}{6} FAX ring count
– {2}: "2" (default)
– {3}: "3"
– {4}: "4"
– {5}: "5"
– {6}: "6"
– {7}: "7"
– {8}: "8"
– {9}: "9"
{#}{0}{6} TAD ring count (KX-FP145 only)
– {0}: "RINGER OFF"
– {1}: "TOLL SAVER"
– {2}: "2" (default)
– {3}: "3"
52
– {4}: "4"
– {5}: "5"
– {6}: "6"
– {7}: "7"
– {8}: "8"
– {9}: "9"
{#}{1}{0} Recording time for an incoming
message (KX-FP145 only)
– {0}: "VOX" (default)
– {1}: "1 MIN"
– {2}: "2 MIN"
– {3}: "3 MIN"
– {4}: "4 MIN"
– {5}: "5 MIN"
– {6}: "6 MIN"
– {7}: "7 MIN"
– {8}: "8 MIN"
– {9}: "9 MIN"
{#}{1}{1} Remote operation ID (KX-FP145
only)
– {1}: "ON" (default)
– {2}: "OFF"
L If you select "ON", enter a 3-digit number
except a number using 0 or 7.
{#}{1}{3} Dialling mode
– {1}: "PULSE"
– {2}: "TONE" (default)
{#}{1}{7} Ringer pattern
– {1}: "A" (default)
– {2}: "B"
– {3}: "C"
{#}{2}{2} Journal report
– {1}: "ON" (default)
– {2}: "OFF"
{#}{2}{3} Overseas mode
– {1}: "NEXT FAX"
– {2}: "OFF"
– {3}: "ERROR" (default)
{#}{2}{5} Delayed transmission
– {1}: "ON"
– {2}: "OFF" (default)
L If you select "ON", then enter the fax number
and transmission time using the dial keypad
(see feature #25 on page 48 for details).
{#}{2}{6} Caller ID list
– {1}: "ON"
– {2}: "OFF" (default)