Descriptions Of Components - Draytek VigorAP 910C Quick Start Manual

Descriptions of Components

Ethernet Port
LED
Blue LED
Purple LED
Orange LED
Off
Interface
Ethernet Port
Power Jack (DC IN)
Hole
Factory Reset
Note: For the sake of security, make the accessory kit away from children.
Power Jack (DC IN)
Status Explanation
Blinking VigorAP is ready and can work normally.
Off VigorAP is not ready or fails.
On Power adapter is plugged in and VigorAP is
initializing
Blinking The firmware upgrade is in process.
Off VigorAP is turned off or not functioning.
Explanation
Connects to LAN or router.
Supports PoE power & Gigabit (1000BaseT).
Connecter for a power adapter.
Explanation
Restores the unit back to factory default settings.
To use, insert a small item such as an unbent
paperclip into the hole. You will feel the button
inside depress gently. Hold it for 10 seconds.
The VigorAP will restart with the factory default
configuration and the LED will blink blue.
Factory
LED
Reset