Descriptions Of Components - Draytek VigorAP 810 Quick Start Manual

Descriptions of Components

LED
ACT
USB
LAN B
LAN A1 - A4
WLAN
(Green LED)
on WLAN
button
WPS
(Orange LED)
on WLAN
button
Status Explanation
Off The system is not ready or is failed.
Blinking The system is ready and can work normally.
On A USB device is connected and active.
Blinking The data is transmitting.
On A normal connection is through its corresponding
port.
Off LAN is disconnected.
Blinking Data is transmitting (sending/receiving).
On A normal connection is through its corresponding
port.
Off LAN is disconnected.
Blinking Data is transmitting (sending/receiving).
On Press the button and release it within 2 seconds.
When the wireless function is ready, the green LED
will be on.
Off Press the button and release it within 2 seconds to
turn off the WLAN function.
When the wireless function is not ready, the LED
will be off.
Blinking Data is transmitting (sending/receiving).
(Green)
Blinking When WPS function is enabled by web user
(Orange) interface, press this button for more than 2 seconds to
wait for client's device making network connection
through WPS.
When the orange LED blinks with 1 second cycle for
2 minutes, it means that the AP is waiting for