Descriptions Of Components - Draytek VigorAP 910C Quick Start Manual

Descriptions of Components

LED
Blue LED
Purple LED
Orange LED
Off
Interface
Ethernet Port
Power Jack (DC IN)
Hole
Factory Reset
Status Explanation
Blinking VigorAP is ready and can work normally.
Off VigorAP is not ready or fails.
On Power adapter is plugged in and VigorAP is
initiating.
Blinking The firmware upgrade is in process.
Off VigorAP is powered off.
Explanation
Connecter for xDSL / Cable modem (Giga level)
or router.
Connecter for a power adapter.
Explanation
Restore the default settings when any error occurs
in VigorAP. Usage: Use sharp article (e.g.,
paperclip or pin) to insert into the hole and keep
for more than 10 seconds. Then VigorAP will
restart with the factory default configuration.
When purple LED is On again, it means VigorAP
has restarted and is ready to use.
LED Factory
Reset