Table of Contents
Advertisement
2
.
D
e
s
c
r
i
p
2
.
D
e
s
c
r
i
p
AP918R
LED
ACT
2.4G / 5G
5G Signal (For D
Model)
5G Signal (For D
Model)
5G Signal (For D
Model)
5G Signal (For D
Model)
Interface
Factory Reset
PoE In
PoE Out
(For D Model)
Note
For the sake of safety, keep the access point away from
children.
t
i
o
n
s
o
f
C
o
t
i
o
n
s
o
f
C
Status
Explanation
Off
The system is not ready or has failed.
Blinking The system is ready.
On
Wireless function is ready.
Off
Wireless function is not ready.
Blinking Data is being transmitted (sending/receiving).
The signal strength (excellent) > -50dBm.
The signal strength (good) is between -66dBm ~
-51dBm.
The signal strength (fair) is between -73dBm~
-67dBm.
No signal or the signal strength is <-73dBm.
Description
Restore the default settings. Usage: Switch on the access
point. Press and hold reset button for at least 10 seconds.
The router will restart with the factory default
configuration.
Before pressing the button, the cover should first be
removed by rotating it with a torque of 13 kgf-cm. After
the access point has been reset, replace the cover and
lock it with the same amount of torque.
Connector for receiving power from another device.
Connector for supplying power to another device.
m
p
o
n
e
n
t
o
m
p
o
n
e
n
t
2
s
s
AP918RPD
Advertisement
Table of Contents
