6.2.3. IR Flasher Out — Mono (3.5mm)
The IR Flasher level adjusts the intensity of the IR Flasher output
GND (Sleeve)
IR Signal (Tip)
6.3. RS-232 Control Connections
Bidirectional RS-232 signals are transmitted between the device transmitter and receiver over
the category cable. The transmitter may be connected to a control system, and the receiver
may be connected to an RS-232 controllable device.
B-540-EXT-330-RS-IPW Transmitter
1
2
ON
Control System
RS-232 Control (DB-9)- See Section 6.3.1
HDBaseT Link category - See Section 6.1
GND (Sleeve)
IR Signal (Tip)
Pinout Configuration
FIGURE 8: IR Flasher Out
B
3
A
FIGURE 9: RS-232 Connections
B-540-EXT-330-RS-IPW Receiver
Front
RS-232 Controllable Device
11
A
Back
B