Nexcom NDiS B426 User Manual page 40

Chapter 4: BIOS Setup
Onboard Device Settings
This section is used to configure the onboard devices.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main Advanced Boot Security
Configure Onboard Devices
► Onboard VGA Config
[HD Audio]
Onboard Audio
Onboard LAN Device [Enabled]
LAN Boot ROM [Enabled]
Serial Port 1 Configuration [Enabled]
Device Settings IO=3F8h; IRQ=4;
Change Settings [Auto]
Serial Port 2 Configuration [Disabled]
Device Settings Reset Required
Version 2.17.1254. Copyright (C) 2016 American Megatrends, Inc.
Onboard VGA Config
Configuration for onboard VGA devices.
Onboard Audio
Enables or disables onboard HD audio.
Onboard LAN Device
Enables or disables onboard LAN.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Configure Onboard VGA Device
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F7: Discard Changes
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
LAN Boot ROM
Enables or disables LAN legacy PXE boot.
Serial Port 1 Configuration
Enables or disables serial port 1.
Serial Port 2 Configuration
Enables or disables serial port 2.
26
NDiS B426 User Manual