Weider 265 831.15963.0 User Manual page 9

9. Apply a generous amount of the grease to the
pivot rod (B) on the Frame (2)
Set the Backrest Support (7) into a set of brack-
ets on the Uprights (1, 14).
Orient the Backrest Tubes (5) as shown. Slide a
Backrest Tube onto each side of the pivot rod (B).
10. Orient the Backrest (6) so that the narrow end
(C) is in the indicated location.
Attach the Backrest (6) to the Backrest Tubes (5)
with four M6 x 40mm Screws (30) and four M6
Washers (26); start all the Screws, and then
tighten them.
11. Attach the Seat (11) to the Frame (2) with four
M6 x 40mm Screws (30) and four M6 Washers
(26); start all the Screws, and then tighten
them.
9
1
5
Grease
2
B
5
10
6
5
26
30
11
11
2
9
7
14
C
26
30
26
30