12. Attach the Curl Pad (24) to the Curl Post (27)
with two M8 x 15mm Screws (37).
13. Insert the Curl Post (27) into the Front Leg (8)
and align one of the adjustment holes in the Curl
Post with the indicated hole (D) in the Front Leg.
Then, tighten the Curl Knob (31) into the Front
Leg.
14. Attach a Spring Collar (25) to the weight tube on
the Leg Lever (4).
15. Make sure that all parts are properly tightened before you use the weight bench. Extra parts may be
included. The use of all remaining parts will be explained in ADJUSTMENT, beginning on page 11.
12
13
27
8
14
25
4
10
24
27
37
31
D