Weider 265 831.15963.0 User Manual page 8

6. Attach the Frame (2) and the Stabilizer (13) to
the Crossbar (3) with two M10 x 60mm Carriage
Bolts (34) and two M10 Locknuts (33); do not
tighten the Locknuts yet.
See steps 3–6. Tighten the M10 Locknuts (33)
and the M8 x 15mm Screws (37).
7. Insert a Pad Tube (10) into a hole in the Leg
Lever (4). Slide a Foam Pad (23) onto each side
of the Pad Tube.
Attach the other Pad Tube (not shown) and
two Foam Pads (23) in the same way.
8. Using a plastic bag to keep your fingers clean,
apply a generous amount of the included grease
to an M8 x 75mm Bolt (32).
Attach the Leg Lever (4) to the brackets on the
Front Leg (8) with the M8 x 75mm Bolt (32) and
an M8 Locknut (17). Do not overtighten the
Locknut; the Leg Lever must pivot easily.
6
2
34
7
10
23
23
8
4
8
33
3
13
4
23
17
32
8
Grease