Preparing For Disassembly - Compaq Presario 5600 Series Maintenance & Service Manual

| |
MSG Index Home
Jumpers & Switches

Preparing for Disassembly

To prepare the computer for the removal and replacement procedures,
complete the following steps:
Remove any diskette, compact disc (CD), or Digital Versatile Disk (DVD) from the
1.
computer.
Turn off the computer and any peripheral devices that are connected to the computer.
2.
CAUTION: The computer power switch should be turned off
before you disconnect any cables.
Disconnect the power cord from the electrical outlet then from the computer.
3.
Disconnect all peripheral device cables from the computer.
4.
IMPORTANT:
Back to Removal and Replacement
Maintenance & Service Guide
Presario 5600 Series Personal Computers
|
Preface Product Description
|
Specifications
During disassembly, label each cable as you remove it. Be sure to note
the position and routing of each cable before removal.
|
Troubleshooting
& Replacement
|
Connector Pins
|
Illustrated Parts
|
Power Cord Requirements
|
Removal