Serial Port - Compaq Presario 5600 Series Maintenance & Service Manual

|
MSG Index Home
Removal and Replacement

Serial Port

Disassembly
Sequence
Hood
Front Bezel
Card Guides
Fan
USB Cables
Creativity Center
Mass Storage Devices
Memory
Option Card Retainer
Graphics Board
Fax/Modem
Serial Port
Homenet Daughter Board
Processor
Processor Goal Posts
System Board Cables
System Board
RTC Battery
I/O Panel
Power Supply
Maintenance & Service Guide
Presario 5600 Series Personal Computers
| |
Preface Product Description
|
Jumpers & Switches Specifications
| |
Troubleshooting Illustrated Parts
| |
Connector Pins Power Cord Requirements
Removal
1.
2.
3.
4.
Replacement
|
Removal & Replacement
Perform the
preparation for disassembly
.
procedures
.
Remove the hood
Disconnect the serial cable from connector
J8 (or J47 for models 5650, 5665, 5673,
5676, 5677) on the system board.
Remove the screwlocks that secure the
serial port to the chassis and pull the serial
port cable out of the chassis.
To replace the serial port, reverse the
removal procedure.