Preparation For Disassembly - Compaq Presario Series Maintenance And Service Manual

COMPAQ
Product Description
Home Removal & Replacement
REMOVAL & REPLACEMENT
DISASSEMBLY
SEQUENCE

Preparation for Disassembly

Electrostatic
To prepare the computer for removal and replacement procedures, complete the following steps:
Discharge
1 Remove any diskette, compact disc, or tape from the computer.
Service
2 Turn off the computer and any peripheral devices that are connected to the
Considerations
computer.
Preparation
for
Disassembly
Serial Number
3 Disconnect the power cord from the electrical outlet, and then from the
computer.
Left Easy
4 Disconnect all peripheral device cables from the computer.
Access Panel
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
CAUTION: The computer power switch should
CAUTION.GIF
be turned off before you disconnect any cables.
(182
bytes)
IMPORTANT: During disassembly, label each cable as you remove
it. Be sure to note its position and routing.
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Troubleshooting
Jumper & Switch Information
United States
Illustrated Parts Catalog
Specifications