Troubleshooting; Technical Data; Ec Declaration Of Conformity - Black & Decker GWC1815 Original Instructions Manual

POWERCOMMAND feature
The POWERCOMMAND feature (3) is located on the
GWC1820PC tool handle as shown in Figure G. It allows you
to optimise the tools performance and boost the power as
needed.
Switch the blower on.
u
To activate the "Boost" mode, press and hold the
u
POWERCOMMAND button down.
To deactivate the "Boost" mode, release the
u
POWERCOMMAND button.
Operate in "Normal" mode for most sweeping needs.
u
(Longer runtime will be achieved.)
Activate "Boost" mode as needed to clear heavy or wet
u
debris.

Troubleshooting

Problem Possible cause
Unit will not start. Battery not installed
properly.
Battery not charged.
Battery will not charge. Battery not inserted into
charger.
Charger not plugged in.
Surrounding air
temperature too hot or
too cold.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.

Technical data

Input Voltage
No-Load Speed
Weight
Battery
Voltage
Capacity
Type
Charger
Possible solution
Check battery
Input Voltage
installation.
No-Load Speed
Check battery
charging requirements.
Weight
Insert battery into
charger until green
LED appears.
Battery
Plug charger into a
Voltage
working outlet. Refer
to "Important Charging
Capacity
Notes" for more details.
Type
Check current at
receptacle by plugging
Charger
in a lamp or other
appliance.
Check to see if
receptacle is
connected to a light
switch which turns
power off when you
turn out the lights.
Move charger and
tool to a surrounding
air temperature of
above 40 degree F
(4.5°C) or below 105
degree F (+40.5°C).
Black & Decker declares that these products described under
(Original instructions)
V
DC
/min
kg
V
DC
Ah
Li-Ion
400mA
V
DC
/min
kg
V
DC
Ah
Li-Ion
400mA
Hand/arm weighted vibration value according to
EN 50636-2-100:
= < 2,5 m/s , uncertainty (K) = 1,5 m/s
2
L (sound pressure) 72 dB(A)
PA
uncertainty (K) = 2,8 dB(A)

EC declaration of conformity

MACHINERY DIRECTIVE
%
OUTDOOR NOISE DIRECTIVE
GWC1815/GWC1820PC blower
"technical data" are in compliance with:
2006/42/EC, EN 60335-1: 2012+A11;
EN 50636-2-100:2014
2000/14/EC, Blower, Annex VI
DEKRA Certification B.V., Utrechtseweg 310,
6802 ED Arnhem, The Netherlands
Notified Body ID No.: 0344
ENGLISH
GWC1815
18
12500
1.7
BL1518
18
1.5
GWC1820PC
18
10,000 - 12,500
1.7
BL2018
18
2
.
2
9