Installing The Front Name Plate; Installing The Raid Manager Software - Sun Microsystems StorEdge D1000 Upgrade Installation Manual

Installing the Front Name Plate

It is important to change the name on the front of the chassis from Sun StorEdge
D1000 to Sun StorEdge A1000 to avoid confusion.
Paste the Sun StorEdge A1000 label over the area that identified your pre-upgrade
unit as a D1000.

Installing the RAID Manager Software

1. If you have not already done so, install the RM 6.1.1 software on your host system.
Refer to the documentation that came with your software CD for installation and
operation instructions.
Note – If you have a version of RM 6 already installed, you must upgrade to the
6.1.1 release before you turn on the Sun StorEdge A1000.
2. Turn on the Sun StorEdge A1000.
3. After you turn on the Sun StorEdge A1000, run boot -r on your host system to see
the newly added A1000.
Sun StorEdge D1000 to A1000 Upgrade Installation 5