Advanced mezzanine card pcie hard drive and sas controller (72 pages)
Summary of Contents for Sun Microsystems StorEdge 5310
Page 1
Sun StorEdge 5310 Cluster Setup ™ Instructions — Read This First Sun Microsystems, Inc. www.sun.com Part No. 819-2355-11 May 2005, Revision A Submit comments about this document at: http://www.sun.com/hwdocs/feedback...
Page 2
Copyright 2005 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, Californie 95054, Etats-Unis. Tous droits réservés. Sun Microsystems, Inc. a les droits de propriété intellectuels relatants à la technologie qui est décrit dans ce document. En particulier, et sans la limitation, ces droits de propriété...
Cabling a Controller Enclosure to Three Expansion Enclosures 12 Connecting the Server Health-Monitoring and Network Cables 13 Connecting the Sun StorEdge 5310 Cluster to Copper Fast Ethernet or Gigabit Ethernet Networks 13 Connecting the Sun StorEdge 5310 Cluster to Optional Optical Gigabit Ethernet Networks 14...
Page 4
Sun StorEdge 5310 Cluster Setup Instructions • May 2005...
This document contains Sun StorEdge 5310 Cluster quick setup instructions. For more detail, refer to the Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide. Note – Use these instructions instead of the Setting Up the Sun StorEdge 5310 NAS poster which is intended for single-head system setup only.
This section includes instructions for connecting the Sun StorEdge 5310 Cluster to one or two controller enclosures. Note – The Sun StorEdge 5310 Cluster server serial number is printed on the software license serial number label on the left side of the chassis.
Sun StorEdge 5310 Cluster with two dual-port HBA cards in each server: 1. Connect the HBA port 2 of the first HBA card on the Sun StorEdge 5310 Cluster server H1 to the Controller A host 1 port.
Page 8
Cluster server H1 Step 2 Step 3 Sun StorEdge 5310 Cluster server H2 Step 4 Controller A Controller B Controller enclosure Connecting Pairs of HBA Cards to One Controller Enclosure FIGURE 2 Sun StorEdge 5310 Cluster Setup Instructions • May 2005...
However, you cannot mix EU F (fibre channel) and EU S (SATA) expansion enclosures attached to a controller enclosure. 1. Connect the HBA port 2 of the first HBA card on the Sun StorEdge 5310 Cluster server H1 to the Controller A host 1 port on the first controller enclosure.
Page 10
Sun StorEdge 5310 Cluster server H2 Controller A Controller B First controller enclosure Controller A Controller B Second controller enclosure Sun StorEdge 5310 Cluster to Two Controller Enclosures, Connecting the FIGURE 3 Steps 1-4 Sun StorEdge 5310 Cluster Setup Instructions • May 2005...
Page 11
5. Connect the HBA port 2 of the first HBA card on the Sun StorEdge 5310 Cluster server H2 to the Controller A host 2 port on the first controller enclosure. 6. Connect the HBA port 1 of the first HBA card on the Sun StorEdge 5310 Cluster server H2 to the Controller B host 2 port on the second controller enclosure.
Page 12
Sun StorEdge 5310 Cluster server H2 Controller A Controller B First controller enclosure Controller A Controller B Second controller enclosure Sun StorEdge 5310 Cluster to Two Controller Enclosures, Connecting the FIGURE 4 Steps 5-8 Sun StorEdge 5310 Cluster Setup Instructions • May 2005...
For one expansion enclosure, refer to "Cabling a Controller Enclosure to One Expansion Enclosure" on page 10. For two expansion enclosures, refer to "Cabling a Controller Enclosure to Two Expansion Enclosures" on page 11. Sun StorEdge 5310 Cluster Setup Instructions • May 2005...
For three expansion enclosures, refer to "Cabling a Controller Enclosure to Three Expansion Enclosures" on page 12. For four to seven expansion enclosures, refer to the Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide. Cabling a Controller Enclosure to One Expansion Enclosure To connect a controller enclosure and one expansion enclosure, two 2-meter Active Copper cables are required.
B side port 2 of expansion enclosure 2. 4. Connect one Active Copper cable between the B side port 1 of expansion enclosure 2 and the B side port 2 of expansion enclosure 1. Sun StorEdge 5310 Cluster Setup Instructions • May 2005...
1 of expansion enclosure 3. 4. Connect one Active Copper cable between the B side expansion port of the controller enclosure and B side port 2 of expansion enclosure 3. Sun StorEdge 5310 Cluster Setup Instructions • May 2005...
Connecting the Server Health-Monitoring and Network Cables Each server in a Sun StorEdge 5310 Cluster system uses a dedicated Ethernet connection to communicate with its partner and perform periodic “health checks.” Connecting the Sun StorEdge 5310 Cluster to Copper Fast...
Caution – The expansion enclosures and controller enclosures must always be powered up and properly connected to each other and the Sun StorEdge 5310 Cluster before powering up the Sun StorEdge 5310 Cluster. The expansion enclosures must be powered up first, before the controller enclosures and Sun StorEdge 5310 Cluster.
After making sure all cables between the expansion enclosures and controller enclosures and the Sun StorEdge 5310 Cluster are securely connected and the Sun StorEdge 5310 Cluster is connected to the network and the heartbeat Ethernet cable is connected, turn on the Sun StorEdge 5310 Cluster by using the following procedure: Caution –...
2. Accept the “Applet Security Certificate” and wait until the Web Admin applet gets loaded on this system. 3. At the Web Admin login screen click Apply. (The password can be set later. Refer to the Sun StorEdge 5310 NAS Appliance Software Installation, Configuration, and User Guide.) Sun StorEdge 5310 Cluster Setup Instructions • May 2005...
Page 21
13. On the Set Gateway Address screen, enter the gateway address and click Next to continue. 14. For all the other wizard configuration steps, please refer to the Sun StorEdge 5310 NAS Appliance Software Installation, Configuration, and User Guide for more information.
1/0 and the second and fourth LUN to 1/1. 4. Click Apply. Refer to the Sun StorEdge 5310 NAS Appliance Software Installation, Configuration, and User Guide for additional information about LUNs and other detailed software setup and use. Sun StorEdge 5310 Cluster Setup Instructions • May 2005...