Base Station - Gigaset S850A GO User Manual

Connecting the headset
¤
Connect the headset with 2.5 mm jack to the left side of the
handset .
1
For information on recommended headsets, see the relevant
product page at www.gigaset.com/s850.
The headset volume corresponds with the setting for the receiver
volume ( p. 86).
Connecting the USB data cable
For data exchange between the handset and PC:
¤
Connect the USB data cable with micro-USB plug into the
USB socket at the bottom of the handset
Connect the handset directly to the PC, not via a
USB hub.

Base station

Connecting to the mains power supply
¤
Insert the power cable of the power
adapter into the upper connection socket
at the rear of the base station.
1
¤
Push both cables into the appropriate cable
channels .
2
¤
Insert the power adapter into the power
socket .
3
Only use the supplied network cable.
The network cable must always be connected in order to function, as the phone will
not operate without a power supply.
.
1
1
Base station
1
1
3
2
13