Two-Line And Three-Line Camera Titles - Bosch MIC-7130-PB4 Operation Manual

106 en | Operation
3.
4.
5.
6.
7.
Set Logo Transparency (Optional)
1.
2.
3.
Change the Camera Title
1.
2.
3.
4.
23.7

Two-line and Three-line Camera Titles

There are two options to display camera titles, but these should not be used together. Choose
one of the following modes.
–
–
Mode 1: Azimuth/Elevation/Compass/Zoom Options
Select one of the following options:
–
–
Mode 2: Camera Title combined with Compass
Select one of the following options. Users can toggle between the two options.
–
–
About Fonts for Camera Titles
–
–
–
2016.07 | 5.0 | F.01U.291.520
Select the field Camera name stamping. Select the position of the logo: Bottom, Top, or
Custom.
Note: If you select Custom, then additional fields (Position (XY)) appear where you can
specify the exact position of the logo. In the fields Position (XY), enter the values for the
desired position (0 - 255).
Click Logo Browse to open a file-search dialog. Select the image file (.bmp).
Click Upload to transfer the file to the camera.
The message "Upload successful" should appear.
The new logo, if applicable, replaces the previous one.
Select the field Logo position. Select the position of the logo on either side of the camera
name: Left, Right, or Logo only. (The default value is Off.)
Click Set to save.
Click the check box Transparent background.
Click Set to save.
Note that the color of the entire first line of the logo is the color that will be changed to
transparent in the remainder of the logo. For example, if the first line is white, then all of
the identical white colors of the logo image will become transparent.
Click General. Select Identification.
Delete all of the text in the field Camera name.
Rename the camera if desired.
Click Set to save.
Mode 1: Azimuth/Elevation/Compass/Zoom Options
Mode 2: Camera Title combined with Compass
Display Azimuth/Elevation and ZOOM value (Optical/Digital) at the bottom of the screen.
Use the command AUX ON-95-ENTER.
Display Azimuth/Elevation/Compass at the bottom of the screen. Use the command AUX
ON-96-ENTER.
Display two (2) lines of text at the top of the video. Use the command AUX ON-75-ENTER.
Display three (3) lines of text at the top of the video. Use the command AUX ON-76-
ENTER.
The default font style is white text with a clear background. The font size cannot be
changed.
Using the command AUX ON-77-ENTER, users can change the font color manually when
the camera is in Day Mode. Toggle the text colors in the following sequence: White-
>Yellow->Violet->Red->Cyan->Green->Blue->White.
Using the command AUX OFF-77-ENTER, users can set the color again to the default
white.
Operation Manual
MIC IP starlight 7000 HD
Bosch Security Systems