Select The Mounting Orientation - Bosch MIC-7130-PB4 Operation Manual

20 en | Mounting Location and Mounting Orientation
7.2

Select the Mounting Orientation

MIC Series cameras are designed to be mounted upright (straight up, 90°), inverted (straight
down, 90°), or canted upright (ball up, 45°). The tilt limits for the canted unit prevent it from
working properly if mounted ball down. See the figures below for illustrations of the correct
and the incorrect mounting orientations of MIC cameras.
Correct mounting orientation -
Note the position of the visor when the camera is installed in inverted orientation. The visor is
close to the top of the pan shaft (the body of the MIC), instead of at the bottom of the
inverted camera.
Note: For canted cameras, ensure that your mounting location provides the necessary
clearance (370 mm (14.6 in.)) for the camera head to pan.
Figure 7.1: Top view of canted MIC7000 illustrating distance of pan clearance
The figure below illustrates the tilt range of the camera in upright orientation.
2016.07 | 5.0 | F.01U.291.520
upright, inverted
Operation Manual
Correct mounting orientation -
canted
MIC IP starlight 7000 HD
Incorrect mounting orientation
Bosch Security Systems