General; Identification; User Management - Bosch MIC-7130-PB4 Operation Manual

42 en | General
14

General

14.1

Identification

Camera name
The camera name makes it easier to identify the remote camera location, in the event of an
alarm for example. It will be displayed in the video screen if configured to do so. The camera
name makes the task of administering cameras in larger video monitoring systems easier, for
example using the BVC or Bosch Video Management Systems Programs.
Enter a unique, unambiguous name for the camera in this field. You can use both lines for this.
Do not use any special characters, for example &, in the name. Special characters are not
supported by the system's internal management.
You can use the second line for entering additional characters; these can be selected from a
table.
1.
2.
3.
4.
5.
Camera ID
Each device should be assigned a unique identifier that can be entered here as an additional
means of identification.
Initiator extension
Add text to an initiator name to make identification easier in large iSCSI systems. This text is
added to the initiator name, separated from it by a full stop. (You can see the initiator name in
the System Overview page.)
14.2

User Management

A password prevents unauthorized access to the device. You can use different authorization
levels to limit access.
Proper password protection is only guaranteed when all higher authorization levels are also
protected with a password. Therefore, you always have to start from the highest authorization
level when assigning passwords.
You can define and change a password for each authorization level if you are logged in as
service or if the unit is not password protected.
Enter the password for the appropriate authorization level here. The maximum password text
length is 19 characters and no special characters are allowed.
The device has three authorization levels: service, user, and live.
–
–
–
2016.07 | 5.0 | F.01U.291.520
Click the icon next to the second line. A new window with the character map is opened.
Click the required character. The character is inserted into the Result field.
In the character map, click the << and >> icons to move between the different pages of
the table, or select a page from the list field.
Click the < icon to the right of the Result field to delete the last character, or click the X
icon to delete all characters.
Now click the OK button to apply the selected characters to the second line of the
Camera 1 parameters. The window will close.
service is the highest authorization level. Entering the correct password gives access to
all the functions and allows all configuration settings to be changed.
user is the middle authorization level. At this level you can operate the device, play back
recordings, and also control camera, for example, but you cannot change the
configuration.
live is the lowest authorization level. At this level you can only view the live video image
and switch between the different live image displays.
Operation Manual
MIC IP starlight 7000 HD
Bosch Security Systems