Ii-4. Client Bridge Mode - Edimax OAP900 User Manual

8.
Click "Apply" to save the settings and your AP Controller & Managed APs
should be fully functional. Use Edimax NMS on your AP controller to
manage & monitor your Managed APs.
Refer to your AP controller's user manual for help with Edimax
NMS.
II-4. Client Bridge Mode
Client Bridge mode enables the OAP900 to wirelessly connect to an AP's SSID
while remaining in the same IP address range as that AP – the WAN and LAN
are on the same subnet. This is ideal for last-mile solutions. Settings here are
saved as profiles.
1.
Enter the access point's IP address into the URL bar of a web browser. The
default IP is 192.168.2.2. If the AP is connected to a DHCP server, ensure
you use the correct address.
2.
Enter the default username "admin" and the default password "1234",
and then go to Wireless Settings  Wireless Extender.
18