Edimax OAP900 User Manual page 14

- LAN IP Address
- 5GHz SSID & Security
- Administrator Name & Password
- Time & Date
It is recommended you configure these settings before using the
access point.
1.
To change the access point's LAN IP address, go to "Network Settings" >
"LAN-side IP Address" and you will see the screen below.
2.
Enter the IP address settings you wish to use for your access point. You
can use a dynamic (DHCP) or static IP address, depending on your network
environment. Click "Apply" to save the changes and wait a few moments
for the access point to reload.
When you change your access point's IP address, you need to use
the new IP address to access the browser based configuration
interface instead of the default IP
3.
To change the SSID of your access point's 5GHz wireless network(s), go to
"Wireless Settings" > "5GHz 11ac" > "Basic". Enter the new SSID for your
2.4GHz wireless network in the "SSID1" field and click "Apply".
To utilize multiple 5GHz SSIDs, open the drop down menu labelled
"Enable SSID number" and select how many SSIDs you require.
Then enter a new SSID in the corresponding numbered fields
below, before clicking "Apply".
192.168.2.2.
11