Iv-6. Operation Mode - Edimax OAP900 User Manual

IV-6. Operation Mode
Screenshots displayed are examples. The information shown on
your screen will vary depending on your configuration.
Your access point can function in three different modes.
The default mode for your access point is AP mode.
AP mode is a regular access point for use in your wireless network.
Managed AP mode acts as a "slave" AP within the AP array (controlled by the
AP Controller "master").
In Client Bridge mode the OAP900 connects wirelessly to an AP's SSID while
remaining in the same IP address range as that AP – the WAN and LAN are on
the same subnet. This is ideal for last-mile solutions.
In Managed AP mode some functions of the access point will be
disabled in this user interface and must be set using Edimax Pro
NMS on the AP Controller.
Operation Mode AP Mode is a standard access point in a
wireless network.
Managed AP mode is an AP which is part of
the AP array and is managed by the
Controller AP.
Client Bridge mode is ideal for last mile
solutions.
78