Sunrise Medical Quickie Pulse 6BC Owner's Manual page 42

Q UI C KIE PU LS E
The product is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The user of the
wheelchair can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the wheelchair as recommended below, according to the maximum output power of
TABLE 4
the communications equipment
Rated maximum output power of
Recommended separation distances between portable and mobile RF communications equipment and the product.
transmitter
(W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be deter-
mined user the equation applicable to the frequency of the transmitter, where P is the maximum output power rating transmitter in watts
(W) according to the transmitter manufacturer.
NOTE 1 - At 80 MHz and 800 MHz, the the separation distance for the higher frequency range applies.
NOTE 2 - Guidelines may not apply in all situations. Electromagnetic propagating is affected by absorption and reflection.
119832Rev. G
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
d=1,2 P
0.12
0.38
1.2
3.8
12
42
80 MHz to 80 MHz 800 MHz to 2.5 GHz
d=1,2 P
0.12
0.38
1.2
3.8
12
APPENDIX
d=1,2 P
0.23
0.73
2.3
7.3
23