5: Facp Data Bus - Honeywell ECC-50/100 Instruction Manual

Installation
2.6.5 FACP Data Bus
MS-9600(UD)LS
The FACP communicates with the ECC-50/100 over the ACS or ANN-BUS annunciator link. Wir-
ing must be connected between T erminal TB6 on the FACP and Terminal TB13 on the ECC-50/100
panel.
ECC-50/100
MS-9200UDLS
The MS-9200UDLS FACP communicates with the ECC-50/100 over the ACS or ANN-BUS
annunciator link. Wiring must be connected between Terminal TB9 on the FACP and Terminal
TB13 on the ECC-50/100 panel.
ECC-50/100
Figure 2.20 Connection for MS-9200UDLS to ECC-50/100
40
to other ACS/ANN
devices
Figure 2.19 Connection for MS-9600(UD)LS to ECC-50/100
to other ACS/ANN
devices
Emergency Command Center Manual — P/N LS10001-000FL-E:G 5/3/2016
A B
ANN
ACS
MS-9600(UD)LS
A B
ANN
ACS
+ -
TB8 TB9 TB10
ACS
OUT+ IN+ OUT- IN-
MS-9200UDLS
Output Circuits
SHIELD
SLC SLC SLC SLC
B+ A+ B- A- A B