1: Informational; Speaker Circuit Buttons; Version Information - Honeywell ECC-50/100 Instruction Manual

Programming
3.4.1 Informational

Speaker Circuit Buttons

The Speaker Circuit Button Assignment page reflects what has been programmed into the Address
Assignment page. (Refer to "Speaker Circuit Address Assignment" on page 65.) Based on the
example above, the ECC system's primary operator console has four (4) programmed speaker cir-
cuits, a remote amplifier at address 20 has two (2) speaker circuits, and a second remote amplifier
at address 21 has three (3) speaker circuits. There is a maximum of 24 speaker circuits allowed in
the system.

Version Information

70
Figure 3.12 Speaker Circuit Button Assignments
Figure 3.13 Version Information
Emergency Command Center Manual — P/N LS10001-000FL-E:G 5/3/2016
Main Menu - Informational