Connecting To A Pc - Panasonic Lumix DMC-FZ2A Operating Instructions Manual

Connecting to a PC

[Preparation]
• If your PC uses Microsoft Windows
from the CD that is included. If you are using a newer Microsoft operating system
such as Windows Me, Windows 2000, or Windows XP (Home Edition/
Professional), no USB driver needs to be installed. Your PC should recognize the
camera automatically.
A/V
OUT
USB
1
Insert the Memory Card into the camera, and turn the power switch to
[ON].
2
Connect the camera to a PC via the supplied USB
connection cable 1.
[Windows]
The drive is shown on the [My Computer] folder.
• If it is the first time you are connecting the camera to a PC, the required driver
is installed automatically in order to let the camera be recognized by the
Windows Plug and Play, then it is shown on the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
• When connecting to a PC, we recommend you to use the AC adaptor as the power
source. (P14)
• If the remaining battery power becomes low during communication, the power
indicator blinks and the alarm beeps. In this case, stop the communication. Then
turn the power switch to [OFF] and charge the battery.
• When connecting to a PC, pictures and sounds are not output from the A/V OUT
socket.
• For further information (software installation), read the supplied operating
instructions for PC connection.
Technical use
®
98 or 98SE, a USB driver must be installed
88
ACCESS