Table of Contents
Advertisement
Taking Pictures with Aperture-priority AE
1
2,5
3,4,6,7,8
3,4
REC 1 / 4
W.BALANCE
AE MODE
AE
P
PICT.SIZE
QUALITY
SELECT
SET
7
APERTURE
F2.8
SELECT
• The brightness of the LCD monitor/Viewfinder may differ from that of the actual
images. Check it using review function or setting to playback mode.
• The recordable range is between 120 cm – ¶ (Tele) and 5 cm – ¶ (Wide).
• The available setting range of the aperture value is from F2.8 to F8.0.
• If the subject is too bright, set a larger aperture value, if too dim, set a smaller
aperture value.
• It is not possible to select ISO sensitivity [AUTO].
• If the aperture value is not properly set, the color of the F and the shutter speed
values on the LCD monitor/Viewfinder become red.
Recording images (advanced)
When aperture value is set, the shutter speed
is automatically set from 1 second to
9
1/2000th according to the subject brightness.
(However, the speed range is changed from
1/30th to 1/2000th when flash fires.) Altering
the aperture value changes the depth of field
of the picture.
Manipulating this value can change the
sharpness of the background of your picture.
1
2
3
4
5
SETUP
AUTO
6
A
S
7
1600
8
EXIT
MENU
9
EXIT
45
Set the mode dial to [P/A/S]. (P25)
Press the [MENU] button.
Press 3/4 to select [AE MODE].
Press 2/1 to set to [A].
Press the [MENU] button.
• The menu will disappear.
Press 3.
Press 2/1 to set the aperture value.
Press the 4/[REVIEW/SET] button.
• The adjustment display will disappear.
Take a picture.
Advertisement
Table of Contents
