Table of Contents
Advertisement
Setting the White Balance
1,4 2,3
2,3
REC 1 / 4
W.BALANCE
AUTO
AE MODE
AE
PICT.SIZE
QUALITY
SELECT
SET
• In simple mode [
[AUTO].
• The setting of the white balance is applied to the other recording modes.
• When taking a picture with the flash, the white balance will be automatically
adjusted (only when in [AUTO], halogen mode [
not be properly adjusted when the flash light is insufficient.
Recording images (advanced)
Auto White Balance is designed to
automatically adjust the camera to produce
natural flesh tones. In most situations it works
fine. In some situations where several
different types of lighting are present,
enhanced performance can be achieved by
setting the white balance manually.
[Preparation]
• Set the mode dial except for [
[
1
2
3
SETUP
P
1600
EXIT
MENU
4
] or motion image mode [
58
]. (P25)
Press the [MENU] button.
Press 3/4 to select [W.BALANCE].
Press 2/1 to select the mode.
• [AUTO]: if the auto white balance is set
• [
] (Daylight):
for recording outdoors on a bright day
• [
] (Cloudy):
for recording under cloudy and shady
sky
• [
] (Halogen):
for recording under halogen lighting
• [
] (White set):
for manual setting (Read the following
page where the manual setting is
explained in detail)
Press the [MENU] button.
• The menu will disappear.
], the white balance is fixed to
]), but the white balance may
]/[
]/
Advertisement
Table of Contents
