Connecting To A Pc - Panasonic Lumix DMC-G10W Operating Instructions Manual

Connecting to a PC

You can acquire recorded pictures to a PC by connecting the camera and the PC.
•
Some PCs can read directly from the card removed from the camera. For details, refer to the
operating instructions of your PC.
•
If the computer being used does not support SDXC Memory Cards, a message
prompting you to format may appear. (Doing so will cause recorded images to be erased
so do not choose to format.)
If the card is not recognised, please refer to the below support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
•
You can easily print out or mail the pictures you have imported. Use of the
"PHOTOfunSTUDIO" bundled software on the CD-ROM (supplied) is a convenient way of
doing this.
•
Read the separate operating instructions for the supplied software for more information about
the software in the CD-ROM (supplied) and how to install it.
Preparations: Turn on the camera and the PC.
A USB connection cable (supplied)
•
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
B Align the marks, and insert.
C DC cable (DMW-DCC3; optional)
•
Use a battery with sufficient battery power or the AC adaptor (P163). If the remaining battery
power becomes low while the camera and the PC are communicating, the status indicator
blinks and the alarm beeps.
"
Refer to Disconnecting the USB connection cable safely
USB connection cable. Otherwise, data may be destroyed.
Connect the camera to a PC via the USB connection cable A
(supplied).
•
Do not use any other USB connection cables except the supplied one. Use of
cables other than the supplied USB connection cable may cause malfunction.
Connecting to other equipment
"
(P154) before disconnecting the
153
VQT2S81