Table of Contents
Advertisement
1
2
3
Preparation
ª Temporarily storing the lens hood
You can store the lens hood in the camera
temporarily. Please do not take a picture with
the lens hood stored.
[Preparation]
• Check that the power switch is set to [OFF]
and the lens barrel is stored.
• Close the flash. (P37)
1
Remove the lens hood.
2
Reverse the lens hood and attach it.
• Attach the lens hood adjusting the
mark ± of the lens hood adaptor to the
mark of the lens hood, and rotate the
lens hood to the right.
3
Attach the lens cap.
• When taking pictures with flash, flash light is
interrupted by the lens hood and the bottom
of the screen becomes dark. (vignetting
effect)
We recommend you to remove the lens
hood/lens hood adaptor.
• Even when the lens hood is attached, you
can attach the lens cap without the string.
20
Advertisement
Table of Contents
