Adding Audio To Recorded Pictures (Audio Dubbing) - Panasonic Lumix DMC-FZ2A Operating Instructions Manual

Adding Audio to Recorded Pictures
(Audio Dubbing)
1,6
2,3,4,5
2
PLAY 1 / 2
PROTECT
DPOF PRINT
SLIDE SHOW
AUDIO DUB.
RESIZE
SELECT SET
3,4
AUDIO
DUB.
SELECT
START
Technical use
It is possible to add a 10-second narration to
a recorded picture.
[Preparation]
• Set the mode dial to playback [
1
2
3
4
SETUP
5
EXIT
MENU
6
1600
• Adding audio will use additional memory.
Using this feature will result in fewer images
being able to be saved.
• The audio dubbing cannot be used with
motion images.
EXIT MENU
• The audio dubbing cannot be used with
protected images.
77
Press the [MENU] button.
Press 3/4 to select [AUDIO DUB.]
and then press 1.
Press 2/1 to select the picture.
Press the 4/[REVIEW/SET] button to
start audio recording. (1 Microphone)
• When audio has already been
recorded, after the audio dubbing the
original audio is overwritten.
• When audio has already been
recorded, this message is displayed
"OVERWRITE AUDIO DATA?". Then
press 2 to select [YES], and press the
4/[REVIEW/SET] button to start audio
recording.
Press the 4/[REVIEW/SET] button to
stop audio recording.
• Even if you do not press the
4/[REVIEW/SET] button, after about
10 seconds the audio recording stops
automatically.
Press the [MENU] button 2 times.
• The menu will disappear.
]. (P25)