Setting The White Balance - Panasonic DMC-LC33PP Operating Instructions Manual

Setting the White Balance

2,3
• The setting of the white balance is applied to the other recording modes.
• In simple mode [
[AUTO].
• When taking a picture with the flash, the white balance will be automatically
adjusted (for AUTO and Halogen mode), but the white balance may not be
properly adjusted when the flash light is insufficient.
Downloaded from www.Manualslib.com
1,4 2,3
REC1/3 SETUP
W.BALANCE
PICT.SIZE
1600
QUALITY
SPOT MODE
SELECT SET EXIT
] or motion image mode [
manuals search engine
Recording images (advanced)
Auto White Balance is designed to
automatically adjust the camera to produce
natural flesh tones. In most situations it works
fine. In some situations where several
different types of lighting are present,
enhanced performance can be achieved by
setting the white balance manually.
[Preparation]
• Set the mode dial except for
[ ]/[ ]/[
1
Press the [MENU] button.
2
Press 3/4 to select [W.BALANCE].
3
Press 2/1 to select the mode.
• AUTO: if the auto white balance is set
• (Daylight):
for recording outdoors on a bright day
• (Cloudy):
MENU
for recording under a cloudy and shady
sky
• (Halogen):
for recording under halogen lighting
• (White set):
for manual setting (Read the following
page where the manual setting is
explained in detail)
4
Press the [MENU] button.
• The menu will disappear.
], the white balance is fixed to
48
]. (P22)