Angled Wall Radiation Shield - Superior WCT6820WS Installation And Operation Instructions Manual

*
OFFSET CHIMNEY INSTALLATION
Chimney AC
Support
Starter Section
Straps
Figure 27
OFFSET CHIMNEY INSTALLATION WITH WALL PENETRATION
Rain Cap
Framing
2" x 3"
Figure 28
ACRS
Straps
NOTE: This illustration is not
to scale. It represents how the
chimney must be supported.
A 30 degree offset only is
allowed in the USA and a 45
degree maximum offset is
allowed in Canada.
Collar
Roof Flashing
Offset Support
Insulated Wall
Radiation Shield
NOTE: In cold areas it is recom-
mended to protect the chimney in
a insulated chase.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

ANGLED WALL RADIATION SHIELD

When traversing a combustible wall with the chimney at a 30º or 45º
angle, an angled fi restop or wall radiation shield must be installed. Only
one is required.
NOTE: 45º angle for Canada only (
In cold climate locations (climates where temperatures will fall below 32° F
/ 0° C), we recommend that you use the insulated wall radiation shield
since it will maintain the home's thermal barrier.
Security Chimneys
RSM+ and RSMI30
(RSMI45 - Canada Only)
Chimney Model
ASHT+ * / HT6103+ *
(6" dia). Canada only
DuraTech DTC **
(6" dia). Canada only
S-2100+ * / HT6000+ * /
AC (6" dia).
Table 5
*
Drywall
Figure 29
RSMI45 / 6DTC-S45
* **
® DuraVent ®
6DTC-WTI and 6DTC-S30
(6DTC-S45 - Canada Only)
Angle Hole Size
30º 283 mm x 781 mm (11-1/8" x 30-3/4")
45º 283 mm x 518 mm (11-1/8" x 20-3/8")
30º 283 mm x 781 mm (11-1/8" x 30-3/4")
45º 283 mm x 518 mm (11-1/8" x 20-3/8")
30º 327 mm x 881 mm (12-7/8" x 34-11/16")
30º 380 mm x 972 mm (15" x 38-1/4")
Insulated Wall
Insulated Wall
Radiation Shield
*
Available from Security Chimneys™
**
Available from DuraVent
)
17
®