X*
= Front panel lockout enabled or disabled
0 = front panel unlocked
1 = front panel locked
X(
= HDCP authentication
0 = HDCP not authenticated
1 = HDCP authenticated
X1)
= Signal status
0 = no signal detected
1 = signal detected
X1!
= On and off or enabled and disabled status
0 = off or disabled
1 = on or enabled
X1@
= Switch mode
1 = normal (manual)
2 = auto-input
X1#
= Unit name (up to 24 alphanumeric characters including hyphen [-])
NOTE: Unless otherwise indicated, commands are not case-sensitive.
SW HDMI Series • Remote Communication and Control
23
Need help?
Do you have a question about the SW HDMI Series and is the answer not in the manual?