Table of Contents
Advertisement
USER SETUP MENU SETTING
Scene File Memory
The AW-E560 has five scene file memories, of which three
are preset before shipment from the factory. When the
scene file menu mode is set to [1], [2], or [3], the camera
operates under the preset conditions.
The remaining two, USER A and USER B, can be set as
desired.
Each mode is provided with five scene files.
User Set Screens
<Camera Alone>
NO.1
USER A
(.35-.55)
#0
*GAMMA(NOR)
*GAMMA(SHT)
#1
KNEE POINT
#2
WHITE CLIP
*H.DTL LEVEL H
*V.DTL LEVEL H
#3
*H.DTL LEVEL L
*V.DTL LEVEL L
RET
END
Data of those items marked "*" can be stored in the memory at each of the gain levels (0, 9, 18 dB).
* 0DB
CURR NEW
.45 .45
.45 .45
98
98%
110 110%
31
31
31
31
15
15
15
15
User Setting
(1) Display the SETUP menu.
(2) Select the USER A or USER B of scene file from the
SETUP menu.
(3) Move the cursor to USER, and press the page switch.
The camera is now in the user set state, and the USER
set screen appears on the monitor.
User set operation can be performed at the camera
head or RCU (RCB).
<Camera with RCU (RCB)>
NO.1
(.35-.55)
*GAMMA(NOR)
*GAMMA(SHT)
KNEE POINT
WHITE CLIP
*H.DTL LEVEL H
*V.DTL LEVEL H
*H.DTL LEVEL L
*V.DTL LEVEL L
RET
-43-
USER A
* 0DB
CURR NEW
.45 .45
.45 .45
98
98%
110 110%
31
31
31
31
15
15
15
15
Advertisement
Table of Contents
