Table of Contents
Advertisement
How to assemble the power cable:
The power cable is to be assembled with the connector
provided with the camera.
<Connector pin layout>
1
2
<Wire view>
1. Prepare the wire.
AWG24 or larger
2. Fix with a screw if necessary.
Put the casing and the rubber bushing on after solder-
ing wires to the connector.
4
3
-14-
Caution :
To prevent fire or shock hazard, the UL listed wire VW-
1, style 1007 should be used as for the cable for 12V
DC Input Connector.
Advertisement
Table of Contents
