Panasonic AW-E560 Operating Instructions Manual page 28

Color video camera
Hide thumbs Also See for AW-E560:
Table of Contents

Advertisement

AUTOMATIC WHITE BALANCE CONTROL (AWC)
There are two white balance memories, "AWC A" or "AWC
B" for two different light sources color temperatures, with
the white balance setting. Then, when the two different
light sources are encountered, you may properly operate
the camera by simply change the white balance mode to
either AWC A (A CH) or AWC B (B CH). There is no need
to readjust the camera to the ambient conditions.
* The preset conditions will be renewed whenever you
input new conditions.
1. Turn the white balance selection switch to either "AWC
A" or "AWC B" of RCU or select the white balance
mode either A CH or B CH by SETUP menu.
2. Aim the camera at a white object (a white wall or a
white handkerchief) and zoom in to enlarge the image
as much as possible.
[ADJUSTMENT by CAMERA]
3. In normal shooting mode:
Press the AWC (Item) switch for over 1 second.
In SETUP menu mode:
Select WHITE BAL and press the page switch for over
1 second.
In either case white balance is automatically set in 2
seconds.
[ADJUSTMENT WITH THE RCU (RCB)]
4. When the auto white/auto black set switch is turned to
AWC, the white balance will be automatically set
regardless of camera operation mode. While the sys-
tem is being set, auto warning indicator (LED) blinks
and it goes out when the white balance setting is com-
pleted. If the lamp remains lit, setting must be tried
again.
5. If the painting mode is ON in the page No.1 of the INI-
TIAL SET menu white balance fine adjustment can be
performed with the red gain/blue gain adjustment con-
trol.
AUTO/ATW
ATW
A
B
AUTO
AWC
HOLD
ABC
-26-
PAINTING
R
GAIN
B
TOTAL
PED
PED
R
B

Advertisement

Table of Contents
loading

Table of Contents