Panasonic AW-E560 Operating Instructions Manual page 12

13. Video/RGB Output Connector (VIDEO/RGB)
Composite/Y signal, RGB/Y-C/component signal and
synchronizing signal are output from this connector.
* Refer to Page 41 for signal selection.
The optional cable WV-CA9T5 or WV-CA9T9 must be
used for connection to this connector.
Pin No. Signal
1 GND
2 GND
3 R/PR/C
4 G/Y/Y
5 B/PB/NC
Video/RGB Output Connector (VIDEO/RGB)
t r e
o i u
<Front View>
14. Control Connector (CONTROL)
Control signals for a pan/tilt unit come to this connec-
tor when a pan/tilt unit controller is connected to the
camera through the Remote Control Unit WV-RC700A
with a multicable.
Pin No. Signal
6 SY/COMP
7 SYNC
8 GND
9 C/NC
w q
y
The multiplex adaptor WV-PS550 is connected to this
connector when using a coaxial multiplex system. The
WV-RC700A and WV-PS550 can be connected with a
coaxial cable.
Pin No. Signal
1 Composite Video Output
2 GND
3 Not Used
4 Not Used
5 G/L Input
6 GND
7 WV-PS550 Detect
8 PS Transmission
9 PS Reception
10 GND
11 UP Control Output
12 Down Control Output
13 Left Control Output
14 Right Control Output
Control Connector (CONTROL)
z x c v b
⁄5 ⁄6 ⁄7 ⁄8 ⁄9
-10-
Pin No. Signal
15 Defroster Control Output
16 Wiper Control Output
17 Common
18 +5.2 V Output
19 GND
20 5.2 V Output
21 GND
22 GND
23 DC 12 V Input
24 DC 12 V Input
25 Not Used
26 +9.2 V Output
27 GND
28 GND
n m , . ⁄0 ⁄1 ⁄2 ⁄3 ⁄4
¤0 ¤1 ¤2 ¤3 ¤4 ¤5 ¤6 ¤7 ¤8
<Front View>