Table of Contents
Advertisement
OPERATION MODE SETTING
• Operation Mode Setting
The camera has three memories, including the setup mem-
ory, initial set memory and scene file memory, and various
functions for four operation modes, are preset in the facto-
ry.
Functions can be set as best suited to each operation
mode.
MODE 1: For shooting mainly indoors
MODE 2: For monitoring indoors and outdoors
MODE 3: For microscopic shooting
MODE 4: For video processing and telop shooting
• Settings
1. When power is turned on the camera, the operation
mode selection as shown on the right figure appears
on the monitor screen.
2. One of the operation modes appears blinking and
changes each time the item switch is pressed.
3. Press the page switch to select the desired mode
while it is blinking.
NOTE:
Please refer SETUP/INITIAL SET AND THEIR INITIAL
VALUE TABLE for the details.
CURR:MODE1/SCENE1
MODE1
MODE2
MODE3
MODE4
-31-
Advertisement
Table of Contents
